CYBERLOGIC · UltraScan 650
For clinics · FDA-approved · Ultrasound bone densitometer

True BMD in 10 seconds. No radiation. No DXA referral.

The UltraScan 650 is the first and only FDA-approved ultrasound bone densitometer that directly measures bone mineral density — not a speed-of-sound proxy. Patented Net Time Delay (NTD) technology reports BMDUS in g/cm² at the radius: the FDA-cleared estimate of the BMD DXA would measure at the same site, delivered in your exam room while the patient is still sitting with you.

Use CyberLogic’s own Contact Us page — it works in your browser, no email app or PC mail settings needed. Phone: (212) 260-1351 · Full clinical comparison on cyberlogic.org

UltraScan 650 ultrasound bone densitometer, top view showing the forearm measurement platform and transducers
r = 0.93correlation with DXA
10 secper measurement
The UltraScan 650 desktop unit. USB-powered, pairs with a laptop — no dedicated suite, no shielding, no ionizing radiation.
g/cm²Reports BMD (BMDUS) plus T-score and Z-score — the same units and scores your DXA reports use
0.93Pearson correlation vs. DXA at the 1/3 radius in clinical validation (r = 0.931)
2.1%Measurement precision (coefficient of variation) — comparable to x-ray absorptiometry
0Ionizing radiation. Ultrasound only — repeat and monitor as often as clinically useful

The problem in clinic

Osteoporosis screening breaks down between “order a DXA” and “patient actually gets one”

Central DXA is the gold standard — and a bottleneck. Portable sonometers fixed the access problem but gave up the number that matters. UltraScan 650 was built to close both gaps at once.

DXA is accurate — and hard to complete

It needs a dedicated suite, a referral, a separate appointment, and ionizing radiation. Every hand-off loses patients, and results come back days later, after the visit where you could have acted on them.

With UltraScan 650 → DXA-equivalent BMD at the point of care, in the same visit, with no radiation and no referral to lose.

Sonometers are portable — but they don’t measure BMD

Devices like the BeamMed Sunlight MiniOmni measure Speed of Sound (SOS, in m/s). SOS correlates only indirectly with bone mass — conventional SOS/BUA parameters typically correlate with BMD at less than 0.8.

With UltraScan 650 → a direct BMD measurement in g/cm², correlated with DXA at r = 0.93 — a densitometer, not just a sonometer.

Slow screening kills throughput

Heel-based and multi-site scans mean shoes and socks off, multiple probe placements, and about a minute per measurement — friction that quietly pushes screening off a busy schedule.

With UltraScan 650 → roll up a sleeve, scan the radius, done in 10 seconds. Patients stay dressed; your schedule stays intact.

How it works

Net Time Delay: isolate the bone, measure the bone

Most ultrasound devices time a wave and call the speed a result. NTD measures transit time through both the bone and the surrounding soft tissue, then isolates the bone’s own properties — which is what makes a direct BMD possible without x-rays.

Patient forearm positioned on the UltraScan 650 for a radius bone density measurement
Measurement at the 1/3 radius. The patient sits, rolls up a sleeve, and rests their forearm on the unit — no undressing, no heel positioning.
  1. 1

    Position the forearm

    Seat the patient and place the forearm on the platform at the 1/3 radius site — the same anatomical site DXA uses for the radius.

  2. 2

    Scan — 10 seconds

    NTD ultrasound passes through soft tissue and bone. No ionizing radiation, no consumable-heavy setup, USB-powered from the paired laptop.

  3. 3

    Act on a real BMD

    You get BMDUS in g/cm² with T-score and Z-score against a normative x-ray absorptiometry reference database — numbers you can document, trend, and use for longitudinal monitoring in the same visit.

Indications (FDA 510(k) K161919): the UltraScan 650 determines the BMDUS Index in adult men and women and assesses appendicular fracture risk in postmenopausal women. Standard error of the estimate vs. DXA: 0.041 g/cm².

Evidence, not adjectives

Validated against DXA. Cleared by the FDA. Published in peer review.

Every headline number on this page traces to the FDA 510(k) summary or peer-reviewed validation — linked below so your clinical lead can check them in minutes.

Correlation with DXA BMD

Why “measures BMD” and “estimates bone quality” are not the same claim.

UltraScan 650 (NTD)
0.93
Conventional SOS / BUA
< 0.80

UltraScan 650: Pearson r = 0.93 (r = 0.931 in clinical studies) vs. DXA BMD at the 1/3 radius. Conventional bone sonometers relying on SOS and BUA “exhibit weak correlation with BMD, usually less than 0.8.” Bars are drawn to scale against r = 1.00.

The regulatory & research record

What a due-diligence check will find:

  • FDA clearance510(k) K161919 · Class II
  • Precision2.1% CV
  • Std. error vs. DXA0.041 g/cm²
  • Measurement time~10 seconds
  • Development fundingNIH SBIR program
  • ProtectionUS Pat. 7,862,510 · 8,202,219 · 9,039,616

Sources: FDA 510(k) summary K161919 (accessdata.fda.gov) · CyberLogic clinical comparison & validation summary · CyberLogic, Inc., New York — ultrasound research since the early 1990s.

Head to head

UltraScan 650 vs. Sunlight MiniOmni vs. central DXA

If you are replacing a sonometer — or deciding whether point-of-care screening can stand in for a DXA referral for screening and monitoring — this is the comparison that decides it.

FeatureCyberLogic UltraScan 650BeamMed Sunlight MiniOmniCentral DXA
What it measuresTrue BMD (BMDUS) in g/cm², + T- & Z-scoresSpeed of Sound (SOS) in m/sBMD in g/cm², + T- & Z-scores
Correlation with DXAr = 0.93 — DXA-equivalentIndirect correlation onlyReference standard
TechnologyPatented Net Time Delay (NTD)Omnipath axial transmissionDual-energy x-ray absorptiometry
RadiationNone — ultrasoundNone — ultrasoundIonizing radiation (x-ray)
Measurement time10-second scan~1-minute scan, multiple placementsSeparate scheduled appointment
Site & patient prepDistal / 1/3 radius — roll up a sleeveMulti-site options (radius, finger, tibia…)Dedicated suite, scheduled visit
FootprintDesktop, lightweight, USB-powered with a laptopPortableFixed installation
Best roleDXA-equivalent screening, assessment & monitoring in clinicGeneral osteoporosis screeningConfirmatory / central-site diagnosis

UltraScan 650 and MiniOmni columns follow CyberLogic’s published comparison and the FDA 510(k) summary. UltraScan 650 does not replace central DXA where a central-site (hip/spine) diagnosis is required — it gives your clinic a DXA-correlated BMD for screening, risk assessment, and monitoring without sending the patient elsewhere first.

Built for your panel

Where clinics put it to work

Primary care & internal medicine

Close the osteoporosis care gap inside the annual wellness visit: screen at-risk adults on the spot instead of adding a referral that may never complete.

Women’s health & OB/GYN

Postmenopausal fracture-risk assessment is an FDA-cleared indication. A 10-second, radiation-free radius scan fits a well-woman visit without disrupting the room.

Endocrinology & bone health

Precision of 2.1% CV — comparable to x-ray absorptiometry — supports longitudinal monitoring between central DXA studies, with results in the same g/cm² language.

Preventive & population screening

Lightweight, USB-powered, and fast enough for health fairs and screening programs — hospitals, universities, and research labs already use the platform.

What 50 saved seconds per patient adds up to

Drag to your weekly screening volume. This compares measurement time only — a 10-second UltraScan 650 scan against a ~1-minute multi-placement sonometer scan — before counting the larger saving: no referral, no second appointment, no heel prep.

Measurement-time comparison only, based on the published 10-second vs. ~1-minute scan times. Your actual visit time also includes positioning and documentation, which are similar for both devices.

UltraScan 650 measurement time / week6.7 min
Sonometer measurement time / week40 min
Staff time returned / year≈ 29 hours
Extra patients you could screen / year*≈ 10,400

*If every saved second were re-spent on 10-second scans — an illustration of headroom, not a throughput promise.

At a glance

Specifications for your evaluation file

Device
UltraScan™ 650 — CyberLogic, Inc.
Classification
FDA Class II bone sonometer, 510(k) K161919
Technology
Patented Net Time Delay (NTD) ultrasound
Output
BMDUS (g/cm²), T-score, Z-score
Site
1/3 radius, forearm
Accuracy
r = 0.93 vs. DXA · SEE 0.041 g/cm²
Precision
2.1% CV
Scan time
~10 seconds
Form factor
Desktop, lightweight, USB-powered (user-supplied laptop)

Questions clinics ask

Straight answers

How is this different from the MiniOmni we already looked at?
MiniOmni measures Speed of Sound (m/s) — an indirect correlate of bone quality. UltraScan 650 directly measures bone mineral density and reports it in g/cm², with T- and Z-scores, correlated with DXA at r = 0.93. It is a densitometer; MiniOmni is a sonometer. See the full comparison above.
Does it replace our DXA referrals entirely?
No — and it doesn’t claim to. Its FDA-cleared role is determining the BMDUS Index in adult men and women and assessing appendicular fracture risk in postmenopausal women. Use it for point-of-care screening, assessment, and monitoring; keep central DXA for cases that need a hip/spine diagnosis.
Is there really no radiation?
Correct. It is an ultrasound device — there is no ionizing radiation for the patient or your staff, no shielded room, and no radiation licensing burden. That also makes repeat monitoring straightforward.
What does the patient have to do?
Sit down and roll up a sleeve. The scan is at the forearm (1/3 radius), takes about 10 seconds, and requires no shoe or sock removal and no heel positioning.
What do we need to run it?
The desktop unit is small, lightweight, and USB-powered, and it works with a user-supplied laptop. There is no dedicated suite or fixed installation. Ask sales for current software and laptop requirements when you request a demo.
How do we evaluate or buy one?
Start with a live demo and the validation file via CyberLogic’s Contact Us page or call (212) 260-1351 (CyberLogic, Brooklyn, NY). The Contact Us page works in your browser — you don’t need an email app set up on your PC. The FDA 510(k) summary (K161919) is public at accessdata.fda.gov if your team wants the primary source first.

Next step

See a 10-second scan, live

Request a demo or quote through CyberLogic’s original Contact Us page. It works in your browser on any PC or phone — no email app, no mail settings, and nothing that depends on how your computer is configured.

Request a demo / quote

Use the helper below to prepare your message, copy it, then paste it into the Contact Us form. Or just open Contact Us and write in your own words — both go to the same CyberLogic team.

  • Your name, clinic / practice, and best way to reach you
  • Your specialty and roughly how many patients you screen per week
  • What you use today (DXA referral, MiniOmni / sonometer, or nothing yet) and your timeline

Step 1: Copy my draft  →  Step 2: Open Contact Us  →  Step 3: Paste and send there.

On cyberlogic.org

Continue on the main CyberLogic site

This clinic page is part of cyberlogic.org. These are the original pages it links to — and the pages that should link back to it once it is published.